Forensic Workstation Canada logo

Forensic workstations built for investigators and labs

A workstation built for forensic imaging and analysis — not a gaming PC dressed up for casework. Built in Toronto since 2018 and priced in Canadian dollars (CAD) — no US-dollar pricing — backed by a 5-year onsite warranty.

Close-up of the OpenText Tableau Forensic bridge fitted in the tower, showing its drive connector, USB and FireWire ports, and the front door hinge
THE STANDARD TOWER — XL FULL SIZE TOWER, WRITE BLOCKER FITTED

CURRENT BUILD

Inspector Workstation

A current build from the bench — spec’d as follows.

5-year Onsite warranty
7–10 days Typical build time
Priced in CAD Canadian dollars — no USD conversion
Since 2018 Custom built to order
01

What a forensic workstation is

A forensic workstation is the machine an examiner images evidence drives on and runs analysis on afterwards. It has to take a suspect drive without ever writing to it, hold several evidence drives at once, and stay dependable through long imaging and processing jobs.

Every build here is assembled and validated by the owner in Toronto, around three things a lab actually runs on: write-blocker support, ECC memory, and hot-swap drive bays — in a full-size tower with room for the drives the work brings in.

Interior of the same Forensic Workstation Canada tower with the side panel off, showing the ASUS GeForce RTX graphics card, liquid cooling, memory slots and drive bays
INSIDE THE STANDARD TOWER — THE SAME BUILD, SIDE PANEL OFF
02

The builds

Four forensic workstation builds, each with its full specification. Choose the build that fits your workload.

NO. 01 FORENSIC WORKSTATION CANADA
Front of an XL full tower forensic workstation

Threadripper PRO 7975WX

128GB memory · 2×4TB NVMe storage

CPU
Ryzen Threadripper PRO 7975WX 32C/64T
Storage
2x4TB NVME SSD
Memory
128GB DDR5 ECC
Graphics
GeForce RTX 5070 Ti
Cooling
Liquid cooling
Power
TOUGHPOWER 1200W
Controller
LSI Ext 12Gb s Tri mode
Case
XL Full Tower case
Included
Keyboard and mouse
Bridge
Universal Bridge - T356789iu SiForce
Front bay
USB Case Box slide-out drawer
Drive bays
Hot-swap drive bays
Warranty
5-year onsite warranty
NO. 02 FORENSIC WORKSTATION CANADA
Front of an XL full tower forensic workstation

Threadripper PRO 9975WX

256GB memory · 2×4TB NVMe storage

CPU
AMD CPU Ryzen Threadripper PRO 9975WX 32C/64T
Storage
2 x 4TB NVME SSD
Memory
256GB DDR5 ECC
Graphics
GeForce RTX 5070 Ti
Cooling
Liquid cooling
Power
TOUGHPOWER 1200W
Bridge
Universal Bridge - T356789iu
Case
XL Full Tower case
Included
Keyboard and mouse
Front bay
USB Case Box slide-out drawer
Drive bays
Hot-swap drive bays
Warranty
5-year onsite warranty
NO. 03 FORENSIC WORKSTATION CANADA
Front of an XL full tower forensic workstation

Threadripper PRO 7975WX — 480TB

512GB memory · 20 SSD trays

CPU
Ryzen Threadripper PRO 7975WX 32C/64T
Storage
480TB (20 SSD Trays)
Memory
512GB DDR5 ECC
Graphics
GeForce RTX 5070 Ti
Cooling
Liquid cooling
Power
TOUGHPOWER 1200W LSI
Case
XL Full Tower case
Included
Keyboard and Mouse
Bridge
Universal Bridge - T356789iu SiForce
Warranty
5-year onsite warranty
NO. 04 FORENSIC WORKSTATION CANADA
Front of an XL full tower forensic workstation

Ryzen 9 9950X

128GB memory · 2TB + 2TB + 4TB NVMe storage

CPU
AMD Ryzen 9 9950X
Storage
2TB NVMe, 2TB NVMe, 4TB NVMe (8TB total)
Memory
128GB DDR5 (non-ECC)
Graphics
GeForce RTX 5070 Ti
Cooling
Liquid cooling
Power
1000W
Case
XL Full Tower case
Bridge
Tableau T3iu
Drive bays
Hot-swap drive bays
Warranty
5-year onsite warranty

Your request, ready to send

Your email app should have opened with this request addressed to us and ready to go — just press send. If it didn’t open, use the buttons below.


            
            
            Opening your email app…
          

Request a build

Don’t see the configuration you need? Every workstation is built to order in Toronto — tell us the work your lab does and we’ll spec a build around it, quoted in Canadian dollars.

Configure a build
03

What to expect from us in every build

What every forensic workstation here is built around, before anything is tailored to your lab — every build priced in Canadian dollars.

CHASSIS

XL full size tower

A full-size tower with the front bays and internal room evidence work needs.

DRIVE BAYS

Hot-swap drive bays

Front-access bays so evidence drives can be loaded and removed without opening the tower.

IMAGING

Write-blocker support

Built to run with a hardware write blocker, keeping source drives read-only during imaging.

MEMORY

ECC memory

Error-correcting memory fitted as standard, sized to the workload when the build is confirmed.

STORAGE

USB Case Box

A front-bay case for the USB drives and dongles a lab runs on. The USB Case Box is the standard on all future forensic workstations.

WARRANTY

5-year onsite warranty

Repairs are done onsite, at your office or lab. If a part fails, a technician will come onsite, bring the replacement and install it, so the workstation and its drives never have to leave — not the shipped-parts version, where the install is left to you.

PRICING

Canadian pricing, in CAD

Every quote and invoice is in Canadian dollars. The CAD price you are quoted is the price you pay — no US-dollar list price, no exchange-rate surprises, and no cross-border fees added later. Comparable US-built machines are quoted in USD, so their Canadian cost moves with the exchange rate.

Tell us what your lab runs, and the build is tailored from this standard — quoted in Canadian dollars (CAD).
04

Previous builds

Recent work from the bench — built and validated in Toronto.

05

How it works

STEP 1

Request a quote

Send your name, your agency or lab, and what you need the workstation for. That is enough to start.

STEP 2

Build confirmed

The build is spec'd from the standard build and quoted in Canadian dollars (CAD), confirmed with you before anything is ordered or assembled.

STEP 3

Built & validated

Assembled and validated in Toronto, then handed over — 7–10 days is the typical build time.

Request a quote Every quote is built around the work your lab does.
06

Partnerships

X-Ways Training Certified X-Ways Forensics training by Derek Frawley — Course Trainer / Owner, F111TH Consulting, X-PERT — sole provider of certified XWF I and II training in Canada. TRAINING
  • X-Ways Forensics I 4 DAYS
  • X-Ways Forensics II 3 DAYS
  • AutomateX training LIVE ONLINE

X-Ways Forensics I includes printed materials and a Certificate of Attendance from X-Ways Software Technology AG, allowing eligibility to attempt X-PERT Certification. AutomateX is live online, 2–4 hours, with group pricing from $250.

Elcomsoft AUTHORIZED RESELLER
07

FAQ — Questions, answered straight

The things investigators and labs ask before they order — answered from the standard build, not a brochure.

What is a forensic workstation?

A forensic workstation is the computer an examiner uses to image evidence drives and run analysis on them. Unlike a regular PC, it reads suspect drives through a hardware write blocker so the source is never altered, and it is built to hold several evidence drives at once and stay dependable through long imaging and processing jobs.

Why isn’t a gaming PC good enough for forensic work?

A gaming PC is built to render frames, not to protect evidence. It has no write blocker, so nothing stops it writing to an evidence drive the moment one is connected; it uses consumer memory with no error correction; and its drives are fixed inside the case, so swapping an evidence drive means opening the case and re-cabling. A forensic workstation has write-blocker support, ECC memory, and front hot-swap drive bays.

What does a Forensic Workstation Canada build include as standard?

Every build is an XL full size tower with front hot-swap drive bays, write-blocker support for imaging, ECC memory, and the USB Case Box — a front-bay case for the USB drives and dongles a lab runs on, and the standard on all future forensic workstations. Every build is covered by a 5-year onsite warranty.

How long does a forensic workstation build take?

7–10 days is the typical build time, once the build is confirmed. Every workstation is assembled and validated by the owner in Toronto before handover.

What does the 5-year onsite warranty mean?

Every build is covered for five years with repairs done onsite, at your office or lab. If a part fails, a technician will come onsite, bring the replacement and install it, so the workstation and its drives never have to leave. That is the difference from the usual vendor version of onsite, where a box of parts is shipped out and the install is left to you.

Is pricing in Canadian dollars?

Yes. Every quote and invoice is in Canadian dollars (CAD) — the price you are quoted is the price in CAD, with no US-dollar conversion, no exchange-rate movement, and no cross-border fees between quote and invoice. Comparable US-built forensic workstations are quoted in US dollars, so their cost in Canada moves with the exchange rate.

Who builds the workstations?

Forensic Workstation Canada (owned and operated by Ordertek Corporation) builds and validates every workstation in Toronto. The business has been building workstations in Toronto since 2018.

How do I get a quote for a forensic workstation?

Use the Ask for a quote button on this page and send your name, your agency or lab, and what you need the workstation for. The build is spec’d from the standard build, quoted in Canadian dollars (CAD), and confirmed with you before anything is ordered or assembled.

Need a workstation your lab can stand behind?

Built in Toronto since 2018. Priced in Canadian dollars (CAD). 5-year onsite warranty. Typical build: 7–10 days.

← BACK TO HOME

Blogs

Notes from the bench — what the builds prove, and what the work actually needs.

All posts

    ← BACK TO PARTNERSHIPS PARTNERSHIPS — TRAINING

    X-Ways Training

    Certified X-Ways Forensics training for examiners, offered through Forensic Workstation Canada and provided by Derek Frawley — Course Trainer / Owner, F111TH Consulting, an X-Ways X-PERT and the sole provider of certified X-Ways Forensics I and II training in Canada. Three courses — the foundation course, the advanced course, and AutomateX automation training — request a quote to book a seat.

    YOUR INSTRUCTOR

    Derek Frawley — Course Trainer / Owner, F111TH Consulting

    Training is provided by Derek Frawley — Course Trainer / Owner, F111TH Consulting, an X-Ways X-PERT and the sole provider of certified XWF I and II training in Canada.

    X-TENSIONS BASELINE

    Jedson Technology X-Tensions

    The training works from the Jedson Technology X-Tensions baseline, so the X-Tensions covered in class match the set examiners build on in their own X-Ways Forensics work.

    X-Ways Forensics I

    4 DAYS

    The main X-Ways Forensics course: a systematic examination of computer media from first imaging through to the report, closing with a practical exam.

    Prerequisite
    Basic knowledge of computer forensics.
    You receive
    Printed materials and a Certificate of Attendance from X-Ways Software Technology AG, which allows eligibility to attempt X-PERT Certification.
    Assessment
    Practical exam.

    WHAT THE COURSE COVERS

    • Systematic examination of computer media
    • Forensically sound disk imaging and cloning
    • Data recovery
    • Search and dynamic filtering
    • Report creation
    • Hash databases
    • Deleted files and partitions
    • Slack space
    • Volume snapshot refinement
    • Gallery view
    • File carving
    • Practical exam

    X-Ways Forensics II

    3 DAYS · ADVANCED

    The advanced X-Ways Forensics course, going deeper into evidence file formats, memory, RAID, scripting with X-Tensions and the command line.

    Who it is for
    Experienced X-Ways Forensics users and previous attendees of the main course (X-Ways Forensics I).
    Level
    Advanced.

    WHAT THE COURSE COVERS

    • .e01 evidence files
    • Skeleton and cleansed images
    • Memory capture
    • Sector superimposition
    • Evidence containers
    • Deleted partitions
    • RAID reconstruction
    • FuzZyDoc
    • Registry viewer and reports
    • X-Tensions
    • Command line
    • Indexing
    • Templates

    AutomateX training

    LIVE ONLINE · 2–4 HOURS

    Live online training in AutomateX: building consistent workflows for CSAM and other cases, so case creation, imaging and refinement run the same way every time.

    Format
    Live online, 2–4 hours.
    Built for
    Consistent workflows for CSAM and other cases.

    WHAT THE TRAINING COVERS

    • Case creation
    • Drive imaging
    • All RVS refinements
    • Simultaneous searching
    • Export to Semantics 21 LASERi-X
    GROUP PRICING
    GroupPrice
    1 attendee$250
    2 attendees$475
    3 attendees$700
    4 attendees$925
    5 or more attendees$1,000
    X-Ways Forensics I attendees receive printed materials and a Certificate of Attendance from X-Ways Software Technology AG, allowing eligibility to attempt X-PERT Certification. Training is provided by Derek Frawley — Course Trainer / Owner, F111TH Consulting, an X-Ways X-PERT and the sole provider of certified XWF I and II training in Canada.
    ← BACK TO PARTNERSHIPS PARTNERSHIPS — AUTHORIZED RESELLER

    Elcomsoft

    Forensic Workstation Canada is an authorized reseller of Elcomsoft forensic software. Four bundles cover password recovery and desktop, mobile and full-suite forensic work — request a quote for any of them.

    Elcomsoft Distributed Password Recovery

    Distributed password recovery — spread the cracking workload across machines to get through protected files and drives faster.

    Elcomsoft Desktop Forensic Bundle

    The Elcomsoft desktop forensic tools in one bundle, for workstation-based examination work.

    Elcomsoft Mobile Forensic Bundle

    The Elcomsoft mobile forensic tools in one bundle, for phone and mobile-device examination work.

    Elcomsoft Premium Forensic Bundle

    The premium Elcomsoft bundle — the full suite for labs that need both desktop and mobile coverage in one package.

    Contact Us

    Tell us who you are and what the workstation has to do. The build is spec'd from there and confirmed with you before anything is ordered.

    • 5-year onsite warranty on every build.
    • Priced in Canadian dollars (CAD) — quoted and invoiced in CAD, no USD conversion.
    • 7–10 days typical build time, once confirmed.
    • Owner-built in Toronto — you deal with the person who builds it.

    Please fill in your name, agency or lab, and what you need the workstation for.

    Your request, ready to send

    Your email app should have opened with this request addressed to us and ready to go — just press send. If it didn’t open, use the button below.

    
                  
                  
                  Opening your email app…
                
    ← BACK TO BUILDS BUILDS — CONFIGURE

    Configure a build

    Start from one of the four builds, then adjust the quantity of each line — more drives, more memory, a line removed. Part types are not swapped here: every starting build is already a working, compatible specification, and quantities are capped so the build stays that way. When it looks right, send it as a quote request — no prices are shown, every quote is confirmed in Canadian dollars (CAD) before anything is ordered.

    How quantities work. Use + / − on each line. The CPU and the XL Full Tower case stay locked at 1 — they define the build and cannot be removed. Lines marked optional can be set to 0 to remove them.

    Caps are the compatibility check. On the Threadripper builds (No. 01–03), memory can be scaled up to 1TB total — the configurator maximum is 1TB. The Ryzen build (No. 04) is a different platform: its memory caps at 256GB total and uses standard DDR5, not ECC RDIMM, and it fits a single graphics card only — a second GPU is not offered on that platform. NVMe storage is capped at 4 drives in total per build, counted across all NVMe lines. NVMe has no minimum: it can be set to 0 and removed entirely, and the quote will show no NVMe storage included, to be confirmed on quote. On No. 03, each SSD tray is 24TB, so the tray storage total updates with the quantity — for example 11 trays = 264TB, and the full 20 trays = 480TB. Memory always stays fitted. On the Threadripper builds, a second graphics card is allowed (up to 2 in total; second video card — PSU and cooling to be confirmed on quote), and there is no second power supply. A quantity that would break the build cannot be set — the limit and the reason are shown on the line.

    Need a different part, not a different quantity? Say so in the message at the bottom — part swaps are quoted individually.

    Quantities reset for the selected build only.

    Request a quote for this configuration

    Your details plus the configuration above — composed into one quote request and sent by email, straight from your own email app.

    Please fill in your name, agency or lab, and what you need the workstation for.

    Your request, ready to send

    Your email app should have opened with this request addressed to us and ready to go — just press send. It lists the base build and every line with its final quantity, with anything changed, added or removed clearly marked. If it didn’t open, use the button below.

    
                  
                  
                  Opening your email app…
                
    ← BACK TO BLOGS BLOG

    ← All posts